Dell PowerConnect M6220 Configuration Guide - Page 27

Example #1: Create Two VLANs, Example #2: Assign Ports to VLAN2

Get Dell PowerConnect M6220 PDF manuals and user guides View all Dell PowerConnect M6220 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 27 highlights

Example #1: Create Two VLANs Use the following commands to create two VLANs and to assign the VLAN IDs while leaving the names blank. console(config)#vlan database console(config-vlan)#vlan 2 console(config-vlan)#vlan 3 console(config-vlan)#exit Example #2: Assign Ports to VLAN2 This sequence shows how to assign ports to VLAN2, specify that frames will always be transmitted tagged from all member ports, and that untagged frames will be rejected on receipt. console(config)#interface ethernet 1/g1 console(config-if-1/g1)#switchport mode general console(config-if-1/g1)#switchport general allowed vlan add 2 console(config-if-1/g1)#switchport general acceptable-frame-type tagged-only console(config-if-1/g1)#exit console(config)#interface ethernet 1/g2 console(config-if-1/g2)#switchport mode general console(config-if-1/g2)#switchport general allowed vlan add 2 console(config-if-1/g2)#switchport general acceptable-frame-type tagged-only console(config-if-1/g2)#exit Example #3: Assign Ports to VLAN3 This example shows how to assign the ports that will belong to VLAN 3. Untagged frames will be accepted on ports 1/g3 and 1/g4. Note that port 1/g2 belongs to both VLANs and that port 1/g1 can never belong to VLAN 3. console(config)#interface ethernet 1/g2 cconsole(config-if-1/g2)#switchport general allowed vlan add 3 console(config-if-1/g2)#exit console(config)#interface ethernet 1/g3 console(config-if-1/g3)#switchport general allowed vlan add 3 console(config-if-1/g3)#exit console(config)#interface ethernet 1/g4 console(config-if-1/g4)#switchport general allowed vlan add 3 Example #4: Assign VLAN3 as the Default VLAN This example shows how to assign VLAN 3 as the default VLAN for port 1/g2. console(config)#interface ethernet 1/g2 console(config-if-1/g2)#switchport general pvid 3 Switching Configuration 27

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
Switching Configuration
27
Example #1: Create Two VLANs
Use the following commands to create two VLANs and to assign the VLAN IDs while leaving the names
blank.
console(config)#vlan database
console(config-vlan)#vlan 2
console(config-vlan)#vlan 3
console(config-vlan)#exit
Example #2: Assign Ports to VLAN2
This sequence shows how to assign ports to VLAN2, specify that frames will always be transmitted
tagged from all member ports, and that untagged frames will be rejected on receipt.
console(config)#interface ethernet 1/g1
console(config-if-1/g1)#switchport mode general
console(config-if-1/g1)#switchport general allowed vlan add 2
console(config-if-1/g1)#
switchport general acceptable-frame-type tagged-only
console(config-if-1/g1)#exit
console(config)#interface ethernet 1/g2
console(config-if-1/g2)#switchport mode general
console(config-if-1/g2)#switchport general allowed vlan add 2
console(config-if-1/g2)#
switchport general acceptable-frame-type tagged-only
console(config-if-1/g2)#exit
Example #3: Assign Ports to VLAN3
This example shows how to assign the ports that will belong to VLAN 3. Untagged frames will be
accepted on ports 1/g3 and 1/g4.
Note that port 1/g2 belongs to both VLANs and that port 1/g1 can never belong to VLAN 3.
console(config)#interface ethernet 1/g2
cconsole(config-if-1/g2)#switchport general allowed vlan add 3
console(config-if-1/g2)#exit
console(config)#interface ethernet 1/g3
console(config-if-1/g3)#switchport general allowed vlan add 3
console(config-if-1/g3)#exit
console(config)#interface ethernet 1/g4
console(config-if-1/g4)#switchport general allowed vlan add 3
Example #4: Assign VLAN3 as the Default VLAN
This example shows how to assign VLAN 3 as the default VLAN for port 1/g2.
console(config)#interface ethernet 1/g2
console(config-if-1/g2)#switchport general pvid 3