Dell PowerConnect M6220 Configuration Guide - Page 18
Example #1: Viewing SNTP Options, Example #2: Configuring the SNTP Server
![]() |
View all Dell PowerConnect M6220 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Example #1: Viewing SNTP Options (Dell PC62XX Routing)(Config) #sntp ? console(config)#sntp ? authenticate authentication-key broadcast client server trusted-key unicast Require authentication for received Network Time Protocol (NTP) traffic from servers. Define an authentication key for Simple Network Time Protocol (SNTP). Configure SNTP client broadcast parameters. Configure the SNTP client parameters. Configure SNTP server parameters. Authenticate the identity of a system to which SNTP will synchronize. Configure SNTP client unicast parameters. Example #2: Configuring the SNTP Server console(config)#sntp server ? Enter SNTP server address or the domain name. console(config)#sntp server 192.168.10.25 ? key poll priority Authentication key to use when sending packets to this peer. Enable/Disable SNTP server polling. Configure SNTP server priority. Press enter to execute the command. console(config)#sntp server 192.168.10.25 Example #3: Viewing SNTP Information console#show sntp ? configuration status Show the configuration of the Simple Network Time Protocol (SNTP). To show the status of the Simple Network Time Protocol (SNTP). console#show sntp configuration Polling interval: 512 seconds MD5 Authentication keys: Authentication is not required for synchronization. Trusted keys: No trusted keys. Unicast clients: Disable 18 System Configuration
![](/manual_guide/products/dell-powerconnect-m6220-configuration-guide-92971e5/18.png)