Dell PowerConnect M6220 Configuration Guide - Page 70
IPv4 OSPFv2, Enable routing and assign IP for ports 1/g2, 1/g3, and 1/g4.
![]() |
View all Dell PowerConnect M6220 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
IPv4 (OSPFv2) IPv6 (OSPFv3) console#config console#config ip routing ipv6 unicast-routing exit exit Enable routing and assign IP for ports 1/g2, 1/g3, and 1/g4. config config interface vlan 70 routing ip address 192.150.2.2 255.255.255.0 exit interface vlan 80 routing ip address 192.130.3.1 255.255.255.0 exit interface vlan 70 routing ipv6 enable exit interface vlan 80 routing ipv6 address 2002::1/64 exit interface vlan 90 routing ip address 192.64.4.1 255.255.255.0 exit interface vlan 90 routing ipv6 address 2003::1/64 exit exit exit Specify a router ID. Disable 1583 compatibility to prevent a routing loop (IPv4-only). config config router ospf ipv6 router ospf router-id 192.150.9.9 router-id 1.1.1.1 no 1583compatibility exit exit exit exit OSPF is globally enabled by default. To make it operational on the router, you configure OSPF for particular interfaces and identify which area the interface is associated with. The following commands also sets the priority and cost for the ports: 70 Routing Configuration
![](/manual_guide/products/dell-powerconnect-m6220-configuration-guide-92971e5/70.png)