Dell PowerSwitch S4128F-ON EMC SmartFabric OS10 User Guide Release 10.5.1 - Page 101

Default Command Mode Usage Information Example ● /home/filepath - Enter the username and the filepath as follows: batch /home/username/ filename. ● config://filepath - Enter the filepath. Not configured EXEC Use this command to create a batch command file on a remote machine. Copy the command file to the home directory on your switch. This command executes commands in batch mode. OS10 automatically commits all commands in a batch file; you do not have to enter the commit command. To display the files stored in the home directory, enter dir home. To view the files stored in the home directory, use the dir home command. batch /home/admin/b.cmd Jun 26 18:29:12 OS10 dn_l3_core_services[723]: Node.1-Unit.1:PRI:notice [os10:trap], %Dell EMC (OS10) %log-notice:IP_ADDRESS_ADD: IP Address add is successful. IP 172.17.4.1/24 in VRF:default added successfully Supported Releases 10.2.0E or later Linux shell commands From the Linux shell, you can run a single command or a series of commands in a batch file. Linux command examples ● Use the -c option to run a single command. admin@OS10:/opt/dell/os10/bin$ clish -c "show version" New user admin logged in at session 10 Network Operating System OS Version: 10.5.1.0 Build Version: 10.5.1.0.123 Build Time: 2020-02-12T02:34:02+0000 System Type: Z9100-ON Architecture: x86_64 Up Time: 05:40:23 User admin logged out at session 10 admin@OS10:/opt/dell/os10/bin$ ● Use the -B option to run a batch file with a series of commands. ○ Create a batch file - for example, batch_cfg.txt - with a series of executable commands. configure terminal router bgp 100 neighbor 100.1.1.1 remote-as 104 no shutdown ○ Execute the batch file. admin@OS10:/opt/dell/os10/bin$ clish -B ~/batch_cfg.txt New user admin logged in at session 15 ○ Verify the BGP settings configured by the batch file. admin@OS10:/opt/dell/os10/bin$ clish -c "show running-configuration bgp" Advanced CLI tasks 101