Dell PowerSwitch S4128F-ON EMC SmartFabric OS10 User Guide Release 10.5.1 - Page 153

Table 7. Time zones and UTC offset (continued) Continent/Country City US Alaska Aleutian Arizona Central Eastern East-Indiana Hawaii Indiana-Starke Michigan Mountain Pacific Pacific-New Samoa UTC WET W-SU Zulu UTC offset −09:00 −10:00 −07:00 −06:00 −05:00 −05:00 −10:00 −06:00 −05:00 −07:00 −08:00 −08:00 −11:00 +00:00 +00:00 +03:00 +00:00 System Clock commands clock set Sets the system time. Syntax Parameters clock set time year-month-day time year-month-day Enter time in the format hour:minute:second, where hour is 1 to 24; minute is 1 to 60; second is 1 to 60. For example, enter 5:15 PM as 17:15:00. Enter year-month-day in the format YYYY-MM-DD, where YYYY is a four-digit year, such as 2016; MM is a month from 1 to 12; DD is a day from 1 to 31. Default Command Mode Usage Information Example Not configured EXEC Use this command to reset the system time if the system clock is out of synch with the NTP time. The hardware-based real-clock time (RTC) resets to the new time. The new system clock setting applies immediately. Supported on the MX9116n and MX5108n switches in Full Switch mode starting in release 10.4.0E(R3S). Also supported in SmartFabric mode starting in release 10.5.0.1. OS10# clock set 18:30:10 2017-01-25 Supported Releases 10.2.1E or later System management 153