Dell PowerSwitch S4128F-ON EMC SmartFabric OS10 User Guide Release 10.5.1 - Page 1377

shape Shapes the outgoing traffic rate. Syntax Parameters shape {min {kbps | mbps | pps} min-value [burst-size]} {max {kbps | mbps | pps} max-value [max-burst-size]} ● min - Enter the minimum committed rate in unit in kbps, mbps, or pps. ● kbps - Enter the committed rate unit in kilobits per second, from 0 to 40000000. ● mbps - Enter the committed rate unit in megabits per second, from 0 to 40000. ● pps - Enter the committed rate unit in packets per second, from 1 to 268000000. ● burst-size - Enter the burst size in kilobites per packet, from 0 to 10000 or 1 to 1073000. ● max - Enter the maximum peak rate in kbps, mbps, or pps. ● max-burst-size - Enter the burst size in kilobites per packets, from 0 to 10000 or 1 to 1073000. Default Command Mode Usage Information Example Maximum burst size is 50 kb or 200 packets POLICY-MAP-CLASS-MAP This command only supports the ingress QoS policy type. You must enter both the minimum and maximum values. If you enter the rate value in pps, the burst provided is in packets. If you enter the rate in kbps or mbps, the burst is provided in kb. If you enter the minimum rate in pps, you must also enter the maximum rate in pps. OS10(conf-pmap-c-que)# shape min kbps 11 max kbps 44 Supported Releases 10.2.0E or later show class-map Displays configuration details of all existing class-maps. Syntax Parameters show class-map [type {control-plane | qos | queuing | network-qos} classmap-name] ● type - Enter the policy-map type - qos, queuing, or control-plane. ● qos - Displays all policy-maps of qos type. ● queuing - Displays all policy-maps of queuing type. ● network-qos - Displays all policy-maps of network-qos type. ● control-plane - Displays all policy-maps of control-plane type. ● class-map-name - Displays the QoS class-map name. Default Command Mode Usage Information Example Not configured EXEC This command displays all class-maps of qos, queuing, network-qos, or control-plane type. The class-map-name parameter displays all details of a configured class-map name. OS10# show class-map type qos c1 Class-map (qos): c1 (match-all) Match(not): ip-any dscp 10 Supported Releases 10.2.0E or later Quality of service 1377