Dell PowerVault MD3200i Owner's Manual - Page 127
Define Additional Mapping, Default Group
View all Dell PowerVault MD3200i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 127 highlights
1 In the AMW, select the Mappings tab. 2 In the Topology pane, select: • Default Group • Undefined mappings node • Individual defined mapping • Host group • Host 3 In the toolbar, select Mappings Define Additional Mapping. The Define Additional Mapping window is displayed. 4 In Host group or host, select the appropriate host group or host. All defined hosts, host groups, and the default group appear in the list. NOTE: When configuring an iSCSI storage array, including the MD3200i or MD3220i, if a host or a host group is selected that does not have a SAS host bus adapter (SAS HBA) host port defined, a warning dialog appears. 5 In Logical unit number, select a LUN. The supported LUNs are 0 through 255. 6 Select the virtual disk to be mapped in the Virtual Disk area. The Virtual Disk area lists the names and capacity of the virtual disks that are available for mapping based on the selected host group or selected host. 7 Click Add. NOTE: The Add button is inactive until a host group or host, LUN, and virtual disk are selected. 8 To define additional mappings, repeat step 4 through step 7. NOTE: After a virtual disk has been mapped once, it is no longer available in the Virtual Disk area. 9 Click Close. The mappings are saved. The Topology pane and the Defined Mappings pane in the Mappings tab are updated to reflect the mappings. Configuration: Disk Groups and Virtual Disks 127