Dell PowerVault MD3200i Owner's Manual - Page 69
Setting a Password, Logical, Storage, Array, Set Password, Setup, a Storage Array Password, Password.
View all Dell PowerVault MD3200i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
5 Click Yes. The new storage array name appears in the Select storage array table. 6 Repeat step 2 through step 4 to name or rename additional storage arrays. NOTE: Avoid arbitrary names or names that might lose meaning in the future. Setting a Password You can configure each storage array with a password to protect it from unauthorized access. MDSM prompts for the password when an attempt is made to change the storage array configuration, such as, when a virtual disk is created or deleted. View operations do not change the storage array configuration and do not require a password. You can create a new password or change an existing password. NOTE: It is recommended that you use a long password with at least 15 alphanumeric characters to increase security. To set a new password or change an existing password: 1 Select the relevant storage array and navigate to the AMW for that storage array. See "Array Management Window" on page 61. The AMW for the selected storage array is displayed. 2 In the AMW, perform one of these actions: • Select the storage array in the Logical pane, and then select Storage Array Set Password. • Select the Setup tab, and then click Set a Storage Array Password. • In the AMW, select the Logical tab, right-click and select Set Password. The Set Password dialog appears. 3 If you are resetting the password, type the Current password. NOTE: If you are setting the password for the first time, leave the Current password blank. 4 Type the New password. 5 Re-type the new password in Confirm new password. NOTE: The password in Confirm new password and New password must be exactly the same. Configuration: About Your Storage Array 69