Dell PowerVault MD3200i Owner's Manual - Page 78
Battery Settings - battery replacement
View all Dell PowerVault MD3200i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
• Replacing an SNMP address-Select the SNMP address in the Configured SNMP addresses area, type the replacement community name in Community name and the trap destination in Trap destination, and click Replace. • Deleting an SNMP address-Select the SNMP address in the Configured SNMP addresses area, and click Delete. • Validating an SNMP address-Select the SNMP address in the Configured SNMP addresses area, and click Test. A test message is sent to the SNMP address. A message box with the results of the validation and any error information appears. 4 Click OK. An alert icon appears next to each node in the Tree view for which an alert is set. Follow these guideline for SNMP alerts: • Any SNMP addresses that you had previously configured appear in the Configured SNMP addresses area. • The SNMP Community Name is determined by the system administrator and configured within the a management application, such as the Dell Management Console. More information about the Dell Management Console is available at dell.com. • You can configure multiple SNMP addresses before you click OK. Battery Settings A smart battery backup unit (BBU) can perform a learn cycle. The smart BBU module includes the battery, a battery gas gauge, and a battery charger. The learn cycle calibrates the smart battery gas gauge so that it provides a measurement of the charge of the battery module. A learn cycle can only start when the battery is fully charged. The learn cycle completes the following operations: • Discharges the battery to a predetermined threshold • Charges the battery back to full capacity 78 Configuration: About Your Storage Array