Dell PowerVault MD3200i Owner's Manual - Page 220
Installing the Backplane, Supply/Cooling Fan Module
View all Dell PowerVault MD3200i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 220 highlights
Installing the Backplane 1 Align the holes on the backplane with the holes on the array. 2 Tighten the captive screw to secure the backplane to the chassis. See Figure 16-16 for PowerVault MD3200i or Figure 16-17 for PowerVault MD3220i. 3 Replace the screws that secure the backplane to the chassis. See Figure 16-16 for PowerVault MD3200i or Figure 16-17 for PowerVault MD3220i. 4 Align the slots on the RAID controller module /power supply cage with the tabs on the chassis. See Figure 16-15. 5 Push the RAID controller module /power supply cage toward the front of the array. 6 Replace the screws that secure the RAID controller module /power supply cage to the chassis. 7 Replace the control panel. See "Installing the Control Panel" on page 216. 8 Replace the power supply/cooling fan modules. See "Installing a Power Supply/Cooling Fan Module" on page 214. 9 Replace the hard drives. See "Installing a Hard Drive" on page 202. 10 Connect all the cables to the array. 11 Turn on the array and the host server. 220 Management: Installing Array Components