Dell PowerVault MD3200i Owner's Manual - Page 209
Closing the RAID Controller Module
View all Dell PowerVault MD3200i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 209 highlights
Figure 16-9. Opening and Closing the RAID Controller Module 1 2 3 1 screws (2) 3 indent 2 RAID controller module Closing the RAID Controller Module CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product. 1 Place the cover onto the RAID controller module and offset it slightly towards the back, so that the hooks on the cover fit over the corresponding slots on the RAID controller module. 2 Slide the cover toward the front till it snaps into place. See Figure 16-9. 3 Replace the screws on the RAID controller module. See Figure 16-9. 4 Connect all the cables to the array. 5 Turn on the array and the host server. Management: Installing Array Components 209