Dell PowerVault MD3200i Owner's Manual - Page 74
Configuring Alert Notifications, Configuring E-mail Alerts
![]() |
View all Dell PowerVault MD3200i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
3 Click OK. 4 If you have set a password for the selected storage array, the Enter Password dialog appears. Type the current password for the storage array. 5 Click OK. Configuring Alert Notifications MDSM can send an alert for any condition on the storage array that requires your attention. Alerts can be sent as e-mail messages or as Simple Network Management Protocol (SNMP) trap messages. You can configure alert notifications either for all the storage arrays or a single storage array. To configure alert notifications for all storage arrays: 1 In the EMW, select the Setup tab. 2 Select Configure Alerts. The Configure Alerts dialog is displayed. 3 Select All storage arrays. 4 Click OK. The Configure Alerts dialog is displayed. To configure e-mail alerts, see "Configuring E-mail Alerts" on page 74. To configure SNMP alerts, see "Configuring SNMP Alerts" on page 77. To configure alert notifications for a single storage array: 1 In the EMW, select the Devices tab. 2 Select the relevant storage array, then select EditConfigure Alerts. The Configure Alerts dialog is displayed. To configure e-mail alerts, see "Configuring E-mail Alerts" on page 74. To configure SNMP alerts, see "Configuring SNMP Alerts" on page 77. Configuring E-mail Alerts For more information on configuring alert notifications, see "Configuring Alert Notifications" on page 74. To configure e-mail alerts: 1 Open the Configure Alerts dialog by performing one of these actions: 74 Configuration: About Your Storage Array
![](/manual_guide/products/dell-powervault-md3200i-owners-manual-5914a5a/74.png)