Dell PowerVault MD3620i Owner's Manual - Page 174

Create Copy Wizard The Create Copy Wizard guides you through: 1 Selecting a source virtual disk from a list of available virtual disks 2 Selecting a target virtual disk from a list of available virtual disks 3 Setting the copy priority for the virtual disk copy When you have completed the wizard dialogs, the virtual disk copy starts, and data is read from the source virtual disk and written to the target virtual disk. Operation in Progress icons appear on the source virtual disk and the target virtual disk while the virtual disk copy has a status of In Progress or Pending. Failed Virtual Disk Copy A virtual disk copy can fail due to these conditions: • A read error from the source virtual disk • A write error to the target virtual disk • A failure in the storage array that affects the source virtual disk or the target virtual disk. When the virtual disk copy fails, a critical event is logged in the Event Log, and a Needs Attention icon appears in the Array Management Window. While a virtual disk copy has this status, the host has read-only access to the source virtual disk. Read requests from and write requests to the target virtual disk do not take place until the failure is corrected by using the Recovery Guru. Preferred RAID Controller Module Ownership During a virtual disk copy, the same RAID controller module must own both the source virtual disk and the target virtual disk. If both virtual disks do not have the same preferred RAID controller module when the virtual disk copy starts, the ownership of the target virtual disk is automatically transferred to the preferred RAID controller module of the source virtual disk. When the virtual disk copy is completed or is stopped, ownership of the target virtual disk is restored to its preferred RAID controller module. If ownership of the source virtual disk is changed during the virtual disk copy, ownership of the target virtual disk is also changed. 174 Configuration: Premium Feature-Virtual Disk Copy