Dell PowerVault MD3620i Owner's Manual - Page 38
Physical Disks, Table 4-1., RAID Controller Physical Disk States, Status, Description, Status LED
View all Dell PowerVault MD3620i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Physical Disks Only Dell supported 6.0-Gbps SAS physical disks are supported in the storage array. If the storage array detects unsupported physical disks, it marks the disk as unsupported and the physical disk becomes unavailable for all operations. NOTE: The MD3600i storage enclosure must contain at least two physical disks for proper operation. This is necessary because the physical disks are used to store configuration information. Physical Disk States Table 4-1 describes the various states of the physical disk, which are recognized by the storage array and reported in the MDSM application. Table 4-1. RAID Controller Physical Disk States Status Mode Description Physical Disk Status LED Optimal Assigned The physical disk in the indicated slot Steady green is configured as part of a disk group. Optimal Unassigned The physical disk in the indicated slot Steady green is unused and available to be configured. Optimal Hot Spare Standby The physical disk in the indicated slot Steady green is configured as a hot spare. Optimal Hot Spare in use The physical disk in the indicated slot Steady green is in use as a hot spare within a disk group. Failed Assigned, The physical disk in the indicated slot Amber flashing Unassigned, has failed because of an unrecoverable (150 ms) Hot Spare in error, an incorrect drive type or drive use, or Hot size, or by its operational state being Spare Standby set to failed. Replaced Assigned The physical disk in the indicated slot Green flashing has been replaced and is ready to be, (on 400 ms, off or is actively being, configured into a 100 ms) disk group. 38 Planning: MD3600i Series Storage Array Terms and Concepts