Dell PowerVault MD3620i Owner's Manual - Page 175
Failed RAID Controller Module, Copy Manager, Copying the Virtual Disk
View all Dell PowerVault MD3620i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 175 highlights
Failed RAID Controller Module You must manually change RAID controller module ownership to the alternate RAID controller module to allow the virtual disk copy to complete under all of these conditions: • A virtual disk copy has a status of In Progress. • The preferred RAID controller module of the source virtual disk fails. • The ownership transfer does not occur automatically in the failover. Copy Manager After you create a virtual disk copy by using the Create Copy Wizard, you can monitor the virtual disk copy through the Copy Manager. From the Copy Manager, a virtual disk copy may be re-copied, stopped, or removed. You can also modify the attributes, such as the copy priority and the target virtual disk Read-Only attribute. You can view the status of a virtual disk copy in the Copy Manager. Also, if you need to determine which virtual disks are involved in a virtual disk copy, you can use the Copy Manager or the storage array profile. Copying the Virtual Disk You can create a virtual disk copy by using the Create Copy Wizard. CAUTION: Possible loss of data access-A virtual disk copy overwrites data on the target virtual disk. A virtual disk copy automatically makes the target virtual disk read-only to hosts. You might want to keep this attribute enabled to preserve the data on the target virtual disk. CAUTION: If you decide not to preserve the data on the target virtual disk after the virtual disk copy has completed, disable the Read-Only attribute for the target virtual disk. See "Virtual Disk Read/Write Permissions" on page 1-1 for more information on enabling and disabling the Read-Only attribute for the target virtual disk. Configuration: Premium Feature-Virtual Disk Copy 175