Dell PowerVault MD3620i Owner's Manual - Page 71
Setting a Password, Name/Rename Storage Arrays, Select storage array, Blink, Storage array name
View all Dell PowerVault MD3620i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
The Name/Rename Storage Arrays dialog appears. 2 Select the relevant storage array from the Select storage array table. If you do not know the name or physical location of the storage array, click Blink. After locating the storage array, click OK to turn off the LEDs. The name of the storage array appears in the Storage array name. 3 In Storage array name, type the new name of the storage array. If applicable, add a comment for the storage array in Additional comment. 4 Click Apply. A message is displayed warning you about the implications of changing the storage array name. 5 Click Yes. The new storage array name appears in the Select storage array table. 6 Repeat step 2 through step 4 to name or rename additional storage arrays. NOTE: Avoid arbitrary names or names that might lose meaning in the future. Setting a Password You can configure each storage array with a password to protect it from unauthorized access. MDSM prompts for the password when an attempt is made to change the storage array configuration, such as, when a virtual disk is created or deleted. View operations do not change the storage array configuration and do not require a password. You can create a new password or change an existing password. NOTE: It is recommended that you use a long password with at least 15 alphanumeric characters to increase security. To set a new password or change an existing password: 1 Select the relevant storage array and navigate to the AMW for that storage array. See "Array Management Window" on page 63. The AMW for the selected storage array is displayed. 2 In the AMW, perform one of these actions: • Select the storage array in the Logical pane, and then select Storage Array Set Password. Configuration: About Your Storage Array 71