Dell Precision 330 Service Manual - Page 77
Attaching Hard-Drive Cables (Desktop Chassis)
View all Dell Precision 330 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
b If you are installing a SCSI device, ensure that the SCSI interface cable is properly connected to the interface connector on the SCSI controller board. 5 Connect a DC power cable to the power input connector on the back of the drive (see the following figure). Attaching Hard-Drive Cables (Desktop Chassis) DC power cable power input connector interface connector interface cable primary system board EIDE connector 6 Ensure that all cables are firmly connected. Fold cables out of the way to provide airflow for the fan and cooling vents. 7 Ensure that the control panel cable is firmly connected to the system board. The control panel contains the hard-drive activity indicator. To locate the control panel system board connector, see "System Board Components" or "Interior Service Label." 8 Rotate the power supply back into position until the securing tab snaps into the release latch. Disk Dri ves and Media 77