Dell Precision 330 Service Manual - Page 80
Removing the Diskette-Drive Bracket (Mini Tower Chassis)
View all Dell Precision 330 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
www.dell.com | support.dell.com 1 Turn off the computer and peripherals, disconnect them from their electrical outlets, wait at least 5 seconds, and then remove the computer cover. 2 Rotate the power supply away from the system board. 3 Remove the front panel. 4 Disconnect the DC power and interface cables from the back of the drive. 5 Press the green diskette-drive bracket release button and slide the drive assembly out of the chassis (see the following figure). Removing the Diskette-Drive Bracket (Mini Tower Chassis) drive/bracket assembly bracket release button 6 Remove the mounting screw. 7 Rotate the left side of the diskette drive upward and lift it free from the drive bracket (see the following figure). 80 Disk Dri ves and Media
80
Disk Drives and Media
www.dell.com | support.dell.com
1
Turn off the computer and peripherals, disconnect them from their
electrical outlets, wait at least 5 seconds, and then
remove the
computer cover
.
2
Rotate the power supply
away from the system board.
3
Remove the front panel
.
4
Disconnect the DC power and interface cables from the back of the
drive.
5
Press the green diskette-drive bracket release button and slide the drive
assembly out of the chassis (see the following figure).
Removing the Diskette-Drive Bracket (Mini Tower Chassis)
6
Remove the mounting screw.
7
Rotate the left side of the diskette drive upward and lift it free from
the drive bracket (see the following figure).
bracket release
button
drive/bracket assembly