Dell Precision M90 User Guide - Page 67
Coin-Cell Battery - keyboard
View all Dell Precision M90 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
2. Open the display and remove the hinge cover. See Hinge Cover. 3. Remove the keyboard: a. Remove the two screws at the top of the keyboard. NOTICE: The key caps on the keyboard are fragile, easily dislodged, and time-consuming to replace. Be careful when removing and handling the keyboard. b. Lift the keyboard and hold it up and slightly forward to access to the keyboard connector. c. To disconnect the keyboard cable from the keyboard connector on the system board, rotate the keyboard connector latch toward the front of the computer. d. Slide the keyboard cable out of the keyboard connector on the system board. 1 keyboard 3 keyboard cable 5 keyboard tabs 2 keyboard screws (2) 4 keyboard connector latch NOTICE: To avoid scratching the palm rest when replacing the keyboard, hook the five tabs along the front edge of the keyboard into the palm rest, and then secure the keyboard in place. Coin-Cell Battery CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide. NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on the back of the computer). NOTICE: To avoid damaging the system board, you must remove the battery before you begin working inside the computer. 1. Follow the procedures in Before You Begin. 2. Remove the hinge cover. See Hinge Cover. 3. Remove the keyboard. See Keyboard. 4. Remove the existing coin-cell battery: a. Pull up on the connector to disconnect the battery cable from the system board. b. Press the release latch on the side of the coin-cell battery compartment, and lift the battery. 1 coin-cell battery 2 release latch 3 battery cable connector