Dell S3100 Command Line Reference Guide for the Series 9.110.0 - Page 1054

Version 9.2.(0.0) 9.0.2.0 8.3.19.0 8.3.7.0 7.8.1.0 E-Series legacy command Description Added support for keyword snooping on the Z9000, S4810, and S4820T. Introduced on the S6000. Introduced on the S4820T. Introduced on the S4810. Introduced on the C-Series. Related Commands • show ip pim tib - show the PIM tree information base. ip mroute Assign a static mroute. Syntax Parameters ip mroute [vrf vrf-name] destination mask {ip-address | null 0| {{bgp| ospf} process-id | isis | rip | static} {ip-address | tag | null 0}} [distance] To delete a specific static mroute, use the no ip mroute [vrf vrf-name] destination mask {ipaddress | null 0| {{bgp| ospf} process-id | isis | rip | static} {ip-address | tag | null 0}} [distance] command. To delete all mroutes matching a certain mroute, use the no ip mroute [vrf vrf-name]destination mask command. vrf vrf-name (OPTIONAL) Enter the keyword vrf followed by the name of the VRF to assign a static mroute to that VRF. NOTE: Applies to specific VRF if input is provided, else applies to Default VRF. destination Enter the IP address in dotted decimal format of the destination device. mask Enter the mask in slash prefix formation ( /x ) or in dotted decimal format. null 0 (OPTIONAL) Enter the keyword null then zero (0). [protocol [processid | tag] ip-address] (OPTIONAL) Enter one of the routing protocols: • Enter the BGP as-number then the IP address in dotted decimal format of the reverse path forwarding (RPF) neighbor. The range is from 1 to 65535. • Enter the OSPF process identification number then the IP address in dotted decimal format of the RPF neighbor. the range is from 1 to 65535. • Enter the IS-IS alphanumeric tag string then the IP address in dotted decimal format of the RPF neighbor. • Enter the RIP IP address in dotted decimal format of the RPF neighbor. 1054 Multicast