Dell S3100 Command Line Reference Guide for the Series 9.110.0 - Page 99

Example • exit • config Dell(conf-if-gi-5/1)#do clear counters Clear counters on all interfaces [confirm] Dell(conf-if-gi-5/1)# Dell(conf-if-gi-5/1)#do clear logging Clear logging buffer [confirm] Dell(conf-if-gi-5/1)# Dell(conf-if-gi-5/1)# do reload System configuration has been modified. Save? [yes/no]: n Proceed with reload [confirm yes/no]: n Dell(conf-if-gi-5/1)# enable Enter EXEC Privilege mode or any other privilege level configured. After entering this command, you may need to enter a password. Syntax enable [level] Parameters level (OPTIONAL) Enter a number for a privilege level of Dell Networking OS. The range is from 0 to 15. Defaults Command Modes Command History 15 EXEC This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking OS Command Line Reference Guide. Version 9.10(0.0) 9.8(2.0) 9.8(1.0) 9.8(0.0P5) 9.8(0.0P2) 9.7(0.0) 9.5(0.0) 9.2(1.0) 9.0.2.0 8.3.19.0 8.3.12.0 8.3.11.1 8.1.1.0 7.6.1.0 7.5.1.0 Description Introduced on the S3148. Introduced on the S3100 series. Introduced on the Z9100-ON. Introduced on the S4048-ON. Introduced on the S3048-ON. Introduced on the S6000-ON. Added support for roles on the Z9000, S6000, S4820T, S4810, and MXL. Introduced on the Z9500. Introduced on the S6000. Introduced on the S4820T. Introduced on the S4810. Introduced on the Z9000. Introduced on the E-Series. Introduced on the S-Series. Introduced on the C-Series. Control and Monitoring 99