Dell S3100 Command Line Reference Guide for the Series 9.110.0 - Page 1148

Line Beginning with "Convergence Level" "Min LSA...." "Number of..." Description Displays the intervals set for LSA transmission and acceptance. Displays the number and type of areas configured for this process ID. Example Dell# show ip ospf 10 Routing Process ospf 10 with ID 1.1.1.1 Virtual router default-vrf Supports only single TOS (TOS0) routes SPF schedule delay 5 secs, Hold time between two SPFs 10 secs Convergence Level 0 Min LSA origination 0 msec, Min LSA arrival 1000 msec Min LSA hold time 5000 msec, Max LSA wait time 5000 msec Number of area in this router is 1, normal 1 stub 0 nssa 0 Area BACKBONE (0) Number of interface in this area is 1 SPF algorithm executed 205 times Area ranges are Dell# Related Commands • show ip ospf database - display information about the OSPF routes configured. • show ip ospf interface - display the OSPF interfaces configured. • show ip ospf neighbor - display the OSPF neighbors configured. show ip ospf asbr Display all autonomous system boundary router (ASBR) routers visible to OSPF. Syntax Parameters show ip ospf [process-id | vrf vrf-name] asbr process-id Enter the OSPF Process ID to show a specific process. If no Process ID is entered, command applies only to the first OSPF process. Defaults Command Modes None • EXEC • EXEC Privilege Command History This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking OS Command Line Reference Guide. Version 9.10(0.0) 9.8(2.0) 9.8(1.0) Description Introduced on the S3148. Introduced on the S3100 series. Introduced on the Z9100-ON. 1148 Open Shortest Path First (OSPFv2 and OSPFv3)