Dell S3100 Command Line Reference Guide for the Series 9.110.0 - Page 1111

Example Field keyid: to: dst: netmask: pri: N, MC, E, T hi: di: dr: bdr: Description If the ip ospf message-digest-key command is configured, this field displays the MD5 key Displays the interface to which the packet is intended. Displays the destination IP address. Displays the destination IP address mask. Displays the OSPF priority Displays information available in the Options field of the HELLO packet: • N + (N-bit is set) • N - (N-bit is not set) • MC+ (bit used by MOSPF is set and router is able to forward IP multicast packets) • MC- (bit used by MOSPF is not set and router cannot forward IP multicast packets) • E + (router is able to accept AS External LSAs) • E - (router cannot accept AS External LSAs) • T + (router can support TOS) • T - (router cannot support TOS) Displays the amount of time configured for the HELLO interval. Displays the amount of time configured for the DEAD interval. Displays the IP address of the designated router. Displays the IP address of the Border Area Router. Dell# debug ip ospf 1 packet OSPF process 90, packet debugging is on Dell# 08:14:24 : OSPF(100:00): Xmt. v:2 t:1(HELLO) l:44 rid:192.1.1.1 aid:0.0.0.1 chk:0xa098 aut:0 auk: keyid:0 to:Gi 4/3 dst:224.0.0.5 netmask:255.255.255.0 pri:1 N-, MC-, E+, T-, hi:10 di:40 dr:90.1.1.1 bdr:0.0.0.0 default-information originate To generate a default external route into an OSPF routing domain, configure Dell Networking Operating System (OS). Syntax default-information originate [always] [metric metric-value] [metric-type typevalue] [route-map map-name] To return to the default values, use the no default-information originate command. Parameters always (OPTIONAL) Enter the keyword always to specify that default route information must always be advertised. metric metric-value (OPTIONAL) Enter the keyword metric then a number to configure a metric value for the route. The range is from 1 to 16777214. Open Shortest Path First (OSPFv2 and OSPFv3) 1111