Dell S3100 Command Line Reference Guide for the Series 9.110.0 - Page 923

metric metric-value (OPTIONAL) The value used for the redistributed route. Use a metric value that is consistent with the destination protocol. The range is from 0 to 16777215. The default is 0. metric-type (OPTIONAL) The external link type associated with the default route advertised into a {external | internal} routing domain. The two options are: • external • internal level-1 level-1-2 level-2 match {external | internal} (OPTIONAL) Routes are independently redistributed into IS-IS as Level 1 routes. (OPTIONAL) Routes are independently redistributed into IS-IS as Level-1-2 routes. (OPTIONAL) Routes are independently redistributed into IS-IS as Level 2 routes. This setting is the default. (OPTIONAL) The command used for OSPF to route and redistribute into other routing domains. The values are • internal • external route-map mapname map-name is an identifier for a configured route map. The route map should filter imported routes from the source routing protocol to the current routing protocol. If you do not specify a map-name, all routes are redistributed. If you specify a keyword, but fail to list route map tags, no routes are imported. Defaults Command Modes See Parameters. • ROUTER ISIS (for IPv4) • CONFIGURATION-ROUTER-ISIS-ADDRESS-FAMILY-IPV6 (for IPv6) Command History This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking OS Command Line Reference Guide. Version 9.10(0.0) 9.8(2.0) 9.8(1.0) 9.8(0.0P5) 9.8(0.0P2) 9.7(0.0) 9.5(0.1) 9.0.2.0 8.3.19.0 8.3.11.1 8.3.12.0 Description Introduced on the S3148. Introduced on the S3100 series. Introduced on the Z9100-ON. Introduced on the S4048-ON. Introduced on the S3048-ON. Introduced on the S6000-ON. Introduced on the Z9500. Introduced on the S6000. Introduced on the S4820T. Introduced on the Z9000. Introduced on the S4810. Intermediate System to Intermediate System (IS-IS) 923