Dell S4148U-ON EMC Networking FCoE Deployment with S4148U-ON in NPG Mode - Page 18

Con upstream interfaces to spine switches, S4148U-Leaf1, S4148U-Leaf2, Con BGP routing

Page 18 highlights

Configure upstream interfaces to spine switches S4148U-Leaf1 interface ethernet 1/1/25 description "Z9264F-Spine1 eth 1/1/1" no switchport ip address 192.168.1.1/31 no shutdown interface ethernet 1/1/26 description "Z9264F-Spine2 eth 1/1/1" no switchport ip address 192.168.2.1/31 no shutdown interface loopback 0 description "Router ID" ip address 10.0.2.1/32 no shutdown S4148U-Leaf2 interface ethernet 1/1/25 description "Z9264F-Spine1 eth 1/1/2" no switchport ip address 192.168.1.3/31 no shutdown interface ethernet 1/1/26 description "Z9264F-Spine2 eth 1/1/2" no switchport ip address 192.168.2.3/31 no shutdown interface loopback 0 description "Router ID" ip address 10.0.2.2/32 no shutdown Note: Configuration of the spine switches are not detailed in this document. For information on the leaf-spine architecture and configuration, see Dell EMC Networking Layer 3 Leaf-Spine Deployment and Best Practices with OS10EE. Configure BGP routing The example configuration use of BGP is for the application traffic associated with the layer 3 leaf-spine network. Other routing protocols can be utilized and will not affect the FC storage configuration. S4148U-Leaf1 route-map spine-leaf permit 10 match ip address prefix-list spineleaf ip prefix-list spine-leaf seq 10 permit 10.0.0.0/8 ge 24 ip prefix-list spine-leaf seq 20 permit 172.16.0.0/16 ge 24 router bgp 64701 bestpath as-path multipath-relax maximum-paths ebgp 2 address-family ipv4 unicast redistribute connected route-map spine-leaf exit graceful-restart role receiver-only template spine-leaf fall-over advertisement-interval 1 timers 3 9 exit neighbor 192.168.1.0 S4148U-Leaf2 route-map spine-leaf permit 10 match ip address prefix-list spineleaf ip prefix-list spine-leaf seq 10 permit 10.0.0.0/8 ge 24 ip prefix-list spine-leaf seq 20 permit 172.16.0.0/16 ge 24 router bgp 64702 bestpath as-path multipath-relax maximum-paths ebgp 2 address-family ipv4 unicast redistribute connected route-map spine-leaf exit graceful-restart role receiver-only template spine-leaf fall-over advertisement-interval 1 timers 3 9 exit neighbor 192.168.1.2 18 Dell EMC Networking FCoE Deployment with S4148U-ON in NPG Mode

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37

18
Dell EMC Networking FCoE Deployment with S4148U-ON in NPG Mode
Configure upstream interfaces to spine switches
S4148U-Leaf1
S4148U-Leaf2
interface ethernet 1/1/25
description "Z9264F-Spine1 eth 1/1/1"
no switchport
ip address 192.168.1.1/31
no shutdown
interface ethernet 1/1/26
description "Z9264F-Spine2 eth 1/1/1”
no switchport
ip address 192.168.2.1/31
no shutdown
interface loopback 0
description "Router ID"
ip address 10.0.2.1/32
no shutdown
interface ethernet 1/1/25
description "Z9264F-Spine1 eth 1/1/2"
no switchport
ip address 192.168.1.3/31
no shutdown
interface ethernet 1/1/26
description "Z9264F-Spine2 eth 1/1/2"
no switchport
ip address 192.168.2.3/31
no shutdown
interface loopback 0
description "Router ID"
ip address 10.0.2.2/32
no shutdown
Note:
Configuration of the spine switches are not detailed in this document. For information on the leaf-spine
architecture and configuration, see
Dell EMC Networking Layer 3 Leaf-Spine Deployment and Best Practices
with OS10EE
.
Configure BGP routing
The example configuration use of BGP is for the application traffic associated with the layer 3 leaf-spine
network. Other routing protocols can be utilized and will not affect the FC storage configuration.
S4148U-Leaf1
S4148U-Leaf2
route-map spine-leaf permit 10
match ip address prefix-list spine-
leaf
ip prefix-list spine-leaf seq 10
permit 10.0.0.0/8 ge 24
ip prefix-list spine-leaf seq 20
permit 172.16.0.0/16 ge 24
router bgp 64701
bestpath as-path multipath-relax
maximum-paths ebgp 2
address-family ipv4 unicast
redistribute connected route-map
spine-leaf
exit
graceful-restart role receiver-only
template spine-leaf
fall-over
advertisement-interval 1
timers 3 9
exit
neighbor 192.168.1.0
route-map spine-leaf permit 10
match ip address prefix-list spine-
leaf
ip prefix-list spine-leaf seq 10
permit 10.0.0.0/8 ge 24
ip prefix-list spine-leaf seq 20
permit 172.16.0.0/16 ge 24
router bgp 64702
bestpath as-path multipath-relax
maximum-paths ebgp 2
address-family ipv4 unicast
redistribute connected route-map
spine-leaf
exit
graceful-restart role receiver-only
template spine-leaf
fall-over
advertisement-interval 1
timers 3 9
exit
neighbor 192.168.1.2