Dell S4148U-ON EMC Networking FCoE Deployment with S4148U-ON in NPG Mode - Page 32
Create a datastore
View all Dell S4148U-ON manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
6. Repeat for host's second adapter, vmhba5 in this example. The LUN information on the Adapter Details > Devices tab is identical to the first adapter. 7. Select the first storage adapter, e.g., vmhba4, then select the Adapter Details > Paths tab as shown in Figure 18. The target, LUN number (e.g., LUN 0) and path status are shown. The target field includes the two active storage WWPNs connected to vmhba4. The status field is marked either Active or Active (I/O) for each path. Adapter Details - Paths tab The Paths tab includes similar information for the host's second storage adapter. B.3.6 Create a datastore A datastore that uses the Unity LUN is created on the ESXi host. To create the datastore: 1. In the vSphere Web Client, go to Home > Hosts and Clusters. 2. In the Navigator pane, right-click on the ESXi host and select Storage > New Datastore. 3. In the New Datastore window, leave the Type set to VMFS and click Next. 4. The Name and device selection page appears as shown in Figure 19. In this example, the 80GB LUN mapped to this host appears in the list of devices. Name and device selection page 5. Provide a Datastore name, e.g., Unity 80GB LUN, select the LUN in the list, and click Next. 6. Select the VMFS version. For this guide, it is left at its default setting, VMFS 5. Click Next. 7. Leave the Partition configuration at its default settings and click Next > Finish to create the datastore. 32 Dell EMC Networking FCoE Deployment with S4148U-ON in NPG Mode