Dell S5840cdn Color Smart Printer User Guide - Page 10
Selecting a location for the printer, CAUTION-POTENTIAL INJURY, CAUTION-SHOCK HAZARD
![]() |
View all Dell S5840cdn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Learning about the printer 10 Selecting a location for the printer When selecting a location for the printer, leave enough room to open trays, covers, and doors and to install hardware options. • Set up the printer near an electrical outlet. CAUTION-POTENTIAL INJURY: To avoid the risk of fire or electrical shock, connect the power cord to an appropriately rated and properly grounded electrical outlet that is near the product and easily accessible. CAUTION-SHOCK HAZARD: To avoid the risk of electrical shock, do not place or use this product near water or wet locations. • Make sure that airflow in the room meets the latest revision of the ASHRAE 62 standard or the CEN Technical Committee 156 standard. • Provide a flat, sturdy, and stable surface. • Keep the printer: - Clean, dry, and free of dust. - Away from stray staples and paper clips. - Away from the direct airflow of air conditioners, heaters, or ventilators. - Free from direct sunlight and humidity extremes. • Observe the recommended temperatures and avoid fluctuations: Ambient temperature 10 to 32.2°C (50 to 90°F) Storage temperature -40 to 43°C (-40 to 110°F) • Allow the following recommended amount of space around the printer for proper ventilation: 1 Top 178 mm (7 in.) 2 Right side 127 mm (5 in.) 3 Front 508 mm (20 in.) 4 Left side 127 mm (5 in.) 5 Rear 76 mm (3 in.)
![](/manual_guide/products/dell-s5840cdn-color-smart-printer-user-guide-d7b379f/10.png)