Dell TL4000 User Guide - Page 130

Table 5-9. Drive Status page elements (continued) Menu Item Description 2U Library SCSI Fibre SAS Speed The speed setting of the drive. Choices are Auto (where the drive automatically negotiates the speed of the drive to match that of the server), 1 Gb/s, 2 Gb/s, 4 Gb/s, or 8 Gb/s for Fibre Channel; 3 Gb/s or 6 Gb/s for SAS. X X Topology The type of connection to the host. The choices X are LN-port, N-port, and L port. Hashed SAS The Hashed SAS address is a value that is X address calculated from the WWID for use on the SAS interface FC-AL Loop The loop position number; it shows the numeric X ID ID. Encryption Status* The following entries show the current encryption status for this drive (method, key path, BOP, density report). X X Encryption The type of encryption that is enabled on the method* drive. X X Key path* The path that is used for transferring an encryption key. This setting is dependent upon the encryption method selected. X X BOP policy* Indicates whether the Beginning of Partition (BOP) policy is enabled or disabled. If encryption is enabled, the policy type might display depending on the encryption method used. Policy types include Internal label select, Internal label always, Enabled, or Disabled. Other type designations might display if Advanced Encryption Settings are set (Engineering Support use only). X X Density reporting* LTO drives do not support settings changes to report various densities, thus LTO drives always report (Other). X X *These features are not supported on Gen3 SAS drive types or any SCSI drive types. 4U Library SCSI Fibre SAS X X X X X X X X X X X X X X X 5-38 Dell PowerVault TL2000 Tape Library and TL4000 Tape Library User's Guide