Dell TL4000 User Guide - Page 84
Testing encryption configuration for Library Managed encryption, Target 3 - IP Address - default passwords
View all Dell TL4000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
Note: If SNMP is not enabled (cleared), all SNMP fields are disabled. SNMP v Enabled - Check this box to have SNMP traps sent to an SNMP Management console. v Community Name - An SNMP community name is a text string that acts as a password to authenticate messages that are sent between the SNMP remote management application and the library. Enter your preferred name, or leave as "public". SNMP DESTINATIONS v Target 1 - IP Address - If SNMP traps are enabled, enter an IP address where SNMP traps are sent. v Target 2 - IP Address - Enter an optional second IP address where SNMP traps are sent, or leave as 0.0.0.0. v Target 3 - IP Address - Enter an optional third IP address where SNMP traps are sent, or leave as 0.0.0.0. v Version - The library offers three versions of the SNMP protocol; v1, v2, and v3. Select a version for each Target IP address. v Audit Logging - If SNMP is enabled and Audit Logging is enabled, the library sends SNMP traps to an SNMP Management console when the library or tape drive configuration changes. Note: This option is available only if the library firmware is 9.00 or higher, and the latest library MIB file is added to the SNMP Management console. SNMP V3 SECURITY v User Name - Enter your preferred name, or leave as "initial". v Authentication - The options for Authentication are none, MD5, or SHA. v Authentication Password - The Authentication Password must be at least 8 characters in length. If Authentication is set to none, this field and the Privacy and Privacy Password fields are disabled. v Privacy - The options for Privacy are none, or DES. If Privacy is set to none, then the Privacy Password field is disabled. v Privacy Password - The Privacy Password must be at least 8 characters in length. Note: The factory default settings for SNMP V3 Security are v User Name - initial v Authentication - none v Privacy - none Testing encryption configuration for Library Managed encryption Refer to http://support.dell.com to determine the availability of this feature. If you purchased an encryption activation key and any LTO 4 or higher Fibre Channel or SAS drive in your library, and the library is configured for library managed encryption, run the Key Path Diagnostic to ensure that your encryption configuration is correct. 4-34 Dell PowerVault TL2000 Tape Library and TL4000 Tape Library User's Guide