Dell TL4000 User Guide - Page 141
Con Library: Drives, Secondary TCP port, Secondary IP address, Submit
View all Dell TL4000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 141 highlights
v Secondary TCP port: After the Secondary IP addressis entered, the library automatically sets the value of the Secondary TCP port. Note: The Default Port for TCP (SSL disabled) is 3801. The Default Port for SSL is 443. These values are the default values set by the library. They can be changed depending on the user configuration but the user must make sure that they match the EKM properties file. Note: If SSL is enabled, the encryption host configuration requests an SSL port instead of a TCP port. Review the Dell PowerVault Encryption Key Manager User 's Guide for instructions to locate the appropriate port settings. 11. Click Submit to apply the changes. 12. Install the Dell Encryption Key Manager (EKM) application on your host. See the Dell EKM documentation that is provided with your Encryption packet. The EKM IP address and EKM port are provided to the user by the EKM application. Configure Library: Drives This page allows you to modify the current ID assigned to a SCSI or Fibre Channel drive. Any drive in the library is powered off by clearing the check mark in the Power On box. The displayed information varies depending on the library model and drive type (SCSI, SAS, or Fibre Channel). Table 5-12 lists all available elements on this page. An "X" indicates that the element displays for the specified drive type. Table 5-12. Drive Identity page elements Menu Item Description 2U Library SCSI Fibre SAS SCSI ID For each SCSI drive, click the drop-down list and X select the number of the slot in which the drive is located. Power On For each drive, click in the box to power ON the X X X selected drive. Control Path The control path drive communicates messages X X X from the host to the library. Select this option for each drive that you want to be a control path drive. At least one drive in each logical library must be designated as a control path drive. Port A Configuration: Speed The current speed setting of the drive. For each X Fibre Channel drive, click the drop-down list and select Automatic, 1 Gb/s, 2 Gb/s, 4 Gb/s, or 8 Gb/s. For each SAS drive, select Automatic, 3 Gb/s, or 6 Gb/s. Selecting Automatic allows library speed to automatically negotiate to the current server speed. Topology For each Fibre Channel drive, click LN-Port, X L-Port, or N-Port. FC-AL Loop The loop position number. The options are X ID "Manual" or "Automatic". Port B Configuration: 4U Library SCSI Fibre SAS X X X X X X X X X X Chapter 5. Operations 5-49