Dell TL4000 User Guide - Page 194

Table 8-2. Sub error codes (continued) 73 Error during move sled to block. 80 Opening I/O slot failed. 81 Error during movement to I/O slot open position. 82 Error during moving back - sensor was found. 90 Movement to home position failed. 91 Elevator movement to home position failed. 92 Error during sled movement to rotation position. 93 Error during rotation to home or far position. 94 Sled movement to home sensor position failed. 95 Sled movement to transport position failed. 99 Error during rotation movement to rotation min position A0 Movement of I/O slot failed. A1 Sled movement to sensor failed. A2 Sled movement to rotation position failed. A3 Elevator movement to home position failed. A4 Error during rotation to far position. A5 Sled movement to I/O slot position failed. A6 Error during elevator movement to position A7 Error during mailslot detection B0 EEPROM on robotics controller not accessible or error during Read/Write operation Save/restore configuration settings: not enough internal memory available for creating the file and B1 restoring the file respectively B2 Save/restore configuration settings: restore buffer corrupted, checksum calculation failed B3 Save/restore configuration settings: data base field corrupted B4 Save/restore configuration settings: invalid personality B5 Save/restore configuration settings: invalid file LIBRARY 81 Drive wake up failed 88 Error accessing slot status 90 Accessor load not reached Cartridge Present sensor 91 No activity after Load command 92 Timeout while loading tape 93 No activity after load command 94 Timeout drive Unload 95 Drive terminated unsuccessfully 96 Tape not ejected at robot unload 8-10 Dell PowerVault TL2000 Tape Library and TL4000 Tape Library User's Guide