Dell UP2414Q Dell UltraSharp 24 User's Guide - Page 45
Setting the DP 1.2 Display, Operating the Monitor, A Monitor is able to show content, Display Settings - daisy chain
View all Dell UP2414Q manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Setting Up the DP1.2 Display The default out of factory setting in the UP2414Q is DP1.1a. To enable 3840 x 2160 at 60 Hz, ensure the graphics card of the DP source is DP1.2 certified with MST feature, capable of supporting resolution up to 3840 x 2160 at 60 Hz, and its driver supports DisplayID v1.3, then change the DP setting to DP1.2 by performing the below steps: A) Monitor is able to show content 1. Use OSD button to navigate to Display Settings. Dell UP2414Q Brightness/Contrast Input Source Color Settings Display Settings PBP Settings Energy Settings Menu Settings Other Settings Personalize Energy Use Aspect Ratio 16:9 Sharpness 50 Noise Reduction Dynamic Contrast Uniformity Compensation O DisplayPort 1.2 Display Info Reset Display Settings Resolution: 3840x2160, 30Hz 2. Go to DisplayPort 1.2 selection. 3. Select Enable or Disable accordingly. 4. Follow the screen message to confirm selection of DP1.2 or DP1.1a. Dell UP2414Q Please ensure your Graphics Card can support DP MST (Daisy chain)/HBR2 (High Bit Rate) before changing the monitor setting to DP1.2. Incorrect setting may result in blank screen on monitor. Confirm Exit Dell UP2414Q DP MST/HBR2 will be disabled for DP1.1a. Confirm Exit Operating the Monitor 45