Dell Vostro 16 5635 Owners Manual - Page 57

Power-button module, Removing the power button

Get Dell Vostro 16 5635 PDF manuals and user guides View all Dell Vostro 16 5635 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 57 highlights

Next steps 1. Install the I/O board. 2. Install the base cover. 3. Follow the procedure in After working inside your computer. Power-button module Removing the power button Prerequisites CAUTION: The information in this section is intended for authorized service technicians only. 1. Follow the procedure in Before working inside your computer. 2. Remove the base cover. 3. Remove the I/O board. About this task NOTE: Before removing the base cover, ensure that there is no SD card installed in the SD card slot on your computer. The following image(s) indicate the location of the power button and provides a visual representation of the removal procedure. Steps 1. Remove the three screws (M2.5x5) that secure the left display hinge to the system board. 2. Open the left display hinge at an angle of 90 degrees. 3. Remove the screw (M2x3) that secures the power button to the palm-rest and keyboard assembly. 4. Lift the power button off the palm-rest and keyboard assembly. Removing and installing Field Replaceable Units (FRUs) 57

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
Next steps
1.
Install the
I/O board
.
2.
Install the
base cover
.
3.
Follow the procedure in
After working inside your computer
.
Power-button module
Removing the power button
Prerequisites
CAUTION:
The information in this section is intended for authorized service technicians only.
1.
Follow the procedure in
Before working inside your computer
.
2.
Remove the
base cover
.
3.
Remove the
I/O board
.
About this task
NOTE:
Before removing the base cover, ensure that there is no SD card installed in the SD card slot on your computer.
The following image(s) indicate the location of the power button and provides a visual representation of the removal procedure.
Steps
1.
Remove the three screws (M2.5x5) that secure the left display hinge to the system board.
2.
Open the left display hinge at an angle of 90 degrees.
3.
Remove the screw (M2x3) that secures the power button to the palm-rest and keyboard assembly.
4.
Lift the power button off the palm-rest and keyboard assembly.
Removing and installing Field Replaceable Units (FRUs)
57