Dell Vostro 16 5635 Owners Manual - Page 58
Installing the power button, Prerequisites
![]() |
View all Dell Vostro 16 5635 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Installing the power button Prerequisites CAUTION: The information in this section is intended for authorized service technicians only. If you are replacing a component, remove the existing component before performing the installation process. About this task The following image(s) indicate the location of the power button and provides a visual representation of the installation procedure. Steps 1. Place the power button on the palm-rest and keyboard assembly. 2. Align the screw hole on the power button with the screw hole on the palm-rest and keyboard assembly. 3. Replace the screw (M2x3) that secures the power buttonto the palm-rest and keyboard assembly. 4. Close the left display hinge and align the screw holes on the left display hinge with the screw holes on the palm-rest and keyboard assembly. 5. Replace the three screws (M2.5x5) that secure the left display hinge to the palm-rest and keyboard assembly. Next steps 1. Install the I/O board. 2. Install the base cover. 3. Follow the procedure in After working inside your computer. 58 Removing and installing Field Replaceable Units (FRUs)
![](/manual_guide/products/dell-vostro-16-5635-owners-manual-5d85b0b/58.png)