Dell Vostro 5415 Vostro 14 5415 Service Manual - Page 14
Installing the base cover, Steps, Prerequisites, About this task
![]() |
View all Dell Vostro 5415 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Steps 1. Remove the five screws (M2x4) that secure the base cover to the palm-rest and keyboard assembly. 2. Loosen the two captive screws (M2x7.5) that secure the base cover to the palm-rest and keyboard assembly. 3. Using a plastic scribe, pry the base cover from the bottom left and continue to work on the sides to open the base cover. 4. Lift the base cover off the palm-rest and keyboard assembly. Installing the base cover Prerequisites If you are replacing a component, remove the existing component before performing the installation process. About this task The following image(s) indicate the location of the base cover and provides a visual representation of the installation procedure. 14 Removing and installing components
![](/manual_guide/products/dell-vostro-5415-vostro-14-5415-service-manual-e873a25/14.png)
Steps
1.
Remove the five screws (M2x4) that secure the base cover to the palm-rest and keyboard assembly.
2.
Loosen the two captive screws (M2x7.5) that secure the base cover to the palm-rest and keyboard assembly.
3.
Using a plastic scribe, pry the base cover from the bottom left and continue to work on the sides to open the base cover.
4.
Lift the base cover off the palm-rest and keyboard assembly.
Installing the base cover
Prerequisites
If you are replacing a component, remove the existing component before performing the installation process.
About this task
The following image(s) indicate the location of the base cover and provides a visual representation of the installation procedure.
14
Removing and installing components