Dell Vostro 5415 Vostro 14 5415 Service Manual - Page 42
Touchpad, Removing the touchpad
View all Dell Vostro 5415 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
7. Connect the keyboard-backlight cable to the system board and close the latch. 8. Place the I/O-board and antenna cables back into place and adhere the tapes that secure them to the palm-rest and keyboard assembly. Next steps 1. Install the 3-cell battery or the 4-cell battery, whichever applicable. 2. Install the base cover. 3. Follow the procedure in After working inside your computer. Touchpad Removing the touchpad Prerequisites 1. Follow the procedure in Before working inside your computer. 2. Remove the base cover. 3. Remove the 3-cell battery or the 4-cell battery, whichever applicable. About this task The following image(s) indicate the location of the touchpad and provides a visual representation of the removal procedure. Steps 1. Open the latch and disconnect the touchpad cable from the touchpad. 2. Remove the three screws (M1.6x2) that secure the touchpad bracket to the palm-rest and keyboard assembly. 3. Lift the touchpad bracket off the palm-rest and keyboard assembly. 4. Remove the two screws (M2x1.8) that secure the touchpad to the palm-rest and keyboard assembly. 5. Peel the tapes that secure the touchpad to the palm-rest and keyboard assembly. 6. Lift the touchpad off the palm-rest and keyboard assembly. 42 Removing and installing components