Dell Vostro 5415 Vostro 14 5415 Service Manual - Page 33
Heat sink, Removing the heat sink
View all Dell Vostro 5415 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Steps 1. Connect the coin-cell battery cable to the I/O board. 2. Adhere the coin-cell battery to the palm-rest and keyboard assembly. Next steps 1. Install the base cover. 2. Follow the procedure in After working inside your computer. Heat sink Removing the heat sink Prerequisites 1. Follow the procedure in Before working inside your computer. 2. Remove the base cover. About this task CAUTION: The heat sink may become hot during normal operation. Allow sufficient time for the heat sink to cool before you touch it. NOTE: For maximum cooling of the processor, do not touch the heat transfer areas on the heat sink. The oils in your skin can reduce the heat transfer capability of the thermal grease. The following image(s) indicate the location of the heat sink and provides a visual representation of the removal procedure. Removing and installing components 33