Dell Vostro 5415 Vostro 14 5415 Service Manual - Page 39

Speakers, Removing the speakers

Get Dell Vostro 5415 PDF manuals and user guides View all Dell Vostro 5415 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 39 highlights

Steps 1. Align the ports on the I/O board to the slots on the palm-rest and keyboard assembly. 2. Place the I/O board on the palm-rest and keyboard assembly. 3. Align the screw hole on the I/O board to the screw hole on the palm-rest and keyboard assembly. 4. Replace the screw (M2x3) that secures the I/O board to the palm-rest and keyboard assembly. 5. Connect the I/O-board cable to the connector on the I/O board and close the latch. 6. Connect the power-button with fingerprint-reader cable to the connector on the I/O board and close the latch. NOTE: This step is only applicable for computers shipped with the optional fingerprint reader. 7. Connect the coin-cell battery cable to the I/O board. Next steps 1. Install the network-port bracket. 2. Install the base cover. 3. Follow the procedure in After working inside your computer. Speakers Removing the speakers Prerequisites 1. Follow the procedure in Before working inside your computer. 2. Remove the base cover. 3. Remove the 3-cell battery or the 4-cell battery, whichever applicable. Removing and installing components 39

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
Steps
1.
Align the ports on the I/O board to the slots on the palm-rest and keyboard assembly.
2.
Place the I/O board on the palm-rest and keyboard assembly.
3.
Align the screw hole on the I/O board to the screw hole on the palm-rest and keyboard assembly.
4.
Replace the screw (M2x3) that secures the I/O board to the palm-rest and keyboard assembly.
5.
Connect the I/O-board cable to the connector on the I/O board and close the latch.
6.
Connect the power-button with fingerprint-reader cable to the connector on the I/O board and close the latch.
NOTE:
This step is only applicable for computers shipped with the optional fingerprint reader.
7.
Connect the coin-cell battery cable to the I/O board.
Next steps
1.
Install the
network-port bracket
.
2.
Install the
base cover
.
3.
Follow the procedure in
After working inside your computer
.
Speakers
Removing the speakers
Prerequisites
1.
Follow the procedure in
Before working inside your computer
.
2.
Remove the
base cover
.
3.
Remove the
3-cell battery
or the
4-cell battery
, whichever applicable.
Removing and installing components
39