Dell Vostro 5415 Vostro 14 5415 Service Manual - Page 37
I/O board, Removing the I/O board
![]() |
View all Dell Vostro 5415 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Steps 1. Place the network-port bracket on the I/O board. 2. Align the screw holes on the network-port bracket to the screw holes on the I/O board. 3. Replace the two screws (M2x5) that secure the network-port bracket to the I/O board. 4. Close the left-display hinge and align the screw holes on the left-display hinge with the screw holes on the I/O board. 5. Replace the two screws (M2.5x5) that secure the left-display hinge to the palm-rest and keyboard assembly. Next steps 1. Install the base cover. 2. Follow the procedure in After working inside your computer. I/O board Removing the I/O board Prerequisites 1. Follow the procedure in Before working inside your computer. 2. Remove the base cover. 3. Remove the network-port bracket. About this task The following image(s) indicate the location of the I/O board and provides a visual representation of the removal procedure. Removing and installing components 37
![](/manual_guide/products/dell-vostro-5415-vostro-14-5415-service-manual-e873a25/37.png)