Dell Vostro 5415 Vostro 14 5415 Service Manual - Page 24
Removing the M.2 2280 solid-state drive, About this task, Steps, Next steps, Prerequisites
![]() |
View all Dell Vostro 5415 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
About this task NOTE: This procedure applies if you are installing a M.2 2230 solid-state drive. NOTE: The M.2 card installed on your computer will depend on the configuration ordered. Supported card configurations on the M.2 card slot: ● M.2 2230 solid-state drive + M.2 2230 solid-state drive mounting bracket ● M.2 2280 solid-state drive The following image(s) indicate the location of the M.2 2230 solid-state drive and provides a visual representation of the installation procedure. Steps 1. Align the notch on the M.2 2230 solid-state drive with the tab on the M.2 card slot on the system board. 2. Slide the M.2 2230 solid-state drive into the M.2 card slot on the system board. 3. Replace the screw (M2x3) that secures the M.2 2230 solid-state drive to the system board. Next steps 1. Install the base cover. 2. Follow the procedure in After working inside your computer. Removing the M.2 2280 solid-state drive Prerequisites 1. Follow the procedure in Before working inside your computer. 2. Remove the base cover. About this task NOTE: This procedure applies only to computers shipped with a M.2 2280 solid-state drive installed. NOTE: The M.2 card installed on your computer will depend on the configuration ordered. Supported card configurations on the M.2 card slot: 24 Removing and installing components
![](/manual_guide/products/dell-vostro-5415-vostro-14-5415-service-manual-e873a25/24.png)