Dell Vostro 5415 Vostro 14 5415 Service Manual - Page 35
Network-port bracket, Removing the network-port bracket
![]() |
View all Dell Vostro 5415 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Steps 1. Place the heat-sink on the system board. 2. Align the screw holes on the heat sink to the screw holes on the system board. 3. In sequential order (1>2>3>4>5>6>7) tighten the seven captive screws that secure the heat sink to the system board. NOTE: The number of screws varies depending on the configuration ordered. Next steps 1. Install the base cover. 2. Follow the procedure in After working inside your computer. Network-port bracket Removing the network-port bracket Prerequisites 1. Follow the procedure in Before working inside your computer. 2. Remove the base cover. About this task The following image(s) indicate the location of the network-port bracket and provides a visual representation of the removal procedure. Removing and installing components 35
![](/manual_guide/products/dell-vostro-5415-vostro-14-5415-service-manual-e873a25/35.png)