Dell W-7205 Controller Installation Guide - Page 12
BASE-X (SFP) Ports, Dual-Media Port LEDs, Table 5
View all Dell W-7205 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Figure 3 10/100/1000BASE-T Port Pin Out 1000BASE-X (SFP) Ports The W-7205 controller is equipped with four 1000BASE-X dual-media ports for fiber connectivity only and are intended for use with SFPs (mini-GBICs). Dual-Media Port LEDs Each port is equipped with two LEDs that allow basic monitoring of status, activity, and configuration of the port. l LINK/ACT- Placed above the port to the left, this LED displays the link status and activity of the port. l STATUS- Placed above the port to the right, this LED displays the status of the port. The information displayed by this LED changes based on the LCD mode. The LED behavior corresponding to each LCD mode is listed in Table 5 and Table 6. Table 5: 10/100/1000BASE-T Port LEDs LED Function LCD Mode Indicator Status LINK/ACT Link status Link status Green (Solid) Link established Green (Blinking) Port is transmitting or receiving data Off No link STATUS Port status Administrative Green (Solid) Port enabled Off Port administratively disabled Duplex Green (Solid) Full-duplex Off Half-duplex Speed Green (Solid) 1000 Mbps Off 10/100 Mbps Table 6: 1000BASE-X Port LEDs LED Function LCD Mode LINK/ACT Link status Link status Indicator Green (Solid) Green (Blinking) Off Status Link established Port is transmitting or receiving data No link 12 | W-7205 Controller Dell Networking W-7205 Controller | Installation Guide