Dell W-7205 Controller Installation Guide - Page 17

Power, Status, and Peered LEDs The front panel of the controller also includes Power, Status, and Peered LEDs (see Figure 4) that provide basic monitoring of the overall status of the controller. The following table describes the different behavior of these LEDs: Table 12: Power, Status, and Peered LEDs LED Function Indicator Status Power System Power Green (Solid) Power On Off Power Off Status System Status Green (Solid) Operational Green (Blinking) Device is loading software Amber (Blinking) Major alarm Amber (Solid) Critical alarm Off No power Peered Reserved for future use NA NA LCD Panel The W-7205 controller is equipped with an LCD panel that displays information about the controller's status, and provides a menu that allows basic operations, such as initial setup and reboot. The LCD panel displays two lines of text with a maximum of 16 characters per line. When using the LCD panel, the active line is indicated by an arrow next to the first letter. The LCD panel is operated using the two navigation buttons to the right of the screen. See Figure 4. l Menu- Allows navigation through the menus of the LCD panel l Enter- Confirms and executes the action currently displayed on the LCD panel LCD Menu The LCD menu includes four modes as shown in the following table: Table 13: LCD Panel Mode LCD Mode Function Displayed Status/ Command Description Boot Displays boot status of the controller Booting ArubaOS... Boot status of the controller. LED Displays the mode of the STATUS LED mode: ADM LED of ports. The LED mode menu allows to choose what information is communicated by the STATUS LEDs on each port. See Table 5 for LED mode: DPX descriptions of the LED behavior of each mode. LED mode: SPD Administrative- Displays whether the port is administratively enabled or disabled Duplex- Displays the duplex mode of the port Speed- Displays the speed of the port. Dell Networking W-7205 Controller | Installation Guide W-7205 Controller | 17