Dell W-7205 Controller Installation Guide - Page 19
CPU Module, Power Supply, Grounding Point, Table 14
View all Dell W-7205 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
CPU Module The W-7205 controller is equipped with a pre-installed CPU module on the back panel of the controller. NOTE: Do not remove the CPU module unless directed by an authorized Dell technician. The CPU module is not hot-swappable. For LED behavior on the CPU module, see Table 14. Table 14: Power and Status LEDs on the CPU Module LED Function Indicator Power CPU Power Green (Solid) Off Status CPU Status Green (Solid) Green (Blinking) Off Status Module power On Power Off Module operational Device is loading software No power Power Supply The W-7205 controller is equipped with an integrated AC power supply of 180W. Grounding Point To meet safety and electromagnetic interference (EMI) requirements and to ensure proper operation, the controller must be adequately grounded before power is connected. Connect a grounding cable to earth ground and then attach it to the chassis grounding point using two screws. Comply with electrical grounding standards during all phases of installation and operation of the product. Do not allow the controller's chassis, network ports, power supply, or mounting brackets to contact any device, cable, object, or person attached to a different electrical ground. Also, never connect the device to external storm grounding sources. Dell Networking W-7205 Controller | Installation Guide W-7205 Controller | 19