Dell W-7205 Controller Installation Guide - Page 13
GBASE-X Ports, Table 6,
![]() |
View all Dell W-7205 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Table 6: 1000BASE-X Port LEDs LED Function LCD Mode STATUS Port status Administrative Duplex Speed Indicator Green (Solid) Off Green (Solid) Off Green (Solid) Off Status Port enabled Port administratively disabled Full-duplex NA 1 Gbps NA 10GBASE-X Ports The W-7205 controller is equipped with two 10GBASE-X (SFP+) ports (4 and 5). These ports are intended for use with SFP/SFP+ and support dual-speed (1GbE or 10GbE) operation. Figure 4 10GBASE-X Ports and LEDs Each port is equipped two LEDs that allow basic monitoring of status, activity, and configuration of the port. l LINK/ACT- Placed to the top left of the port, this LED displays the link status and activity of the port. l STATUS- Placed to the top right of the port, this LED displays the status of the port. The information displayed by this LED changes based on the LCD mode. The LED behavior corresponding to each LCD mode is listed in Table 7. Table 7: 10GBASE-X Port LEDs LED Function LCD Mode Indicator Status LINK/ACT Link status NA Green (Solid) Link established Green (Blinking) Port is transmitting or receiving data Off No link Dell Networking W-7205 Controller | Installation Guide W-7205 Controller | 13
![](/manual_guide/products/dell-w7205-controller-installation-guide-003a5a6/13.png)