Dell W-Series 334 Instant 6.5.1.0-4.3.1.0 User Guide - Page 12

Table 3: Supported W-IAP Platforms W-IAP Platform Minimum Required Instant Software Version W-IAP103 W-IAP274/275 Instant 6.4.0.2-4.1.0.0 or later W-IAP114/115 W-IAP224/225 Instant 6.3.1.1-4.0.0.0 or later W-IAP155/155P Instant 6.2.1.0-3.3.0.0 or later W-IAP108/109 Instant 6.2.0.0-3.2.0.0 or later Each W-IAP model has a minimum required Instant software version as shown in Table 3. When a new W-IAP is added into an existing cluster, it can join the cluster only if the existing cluster is running at least the minimum required version of that W-IAP. If the existing cluster is running a version prior to the minimum required version of the new W-IAP, new W-IAP will not come up and may reboot with the reason Image sync fail. To recover from this condition, upgrade the existing cluster to at least the minimum required version of the new W-IAP first, and add the new W-IAP. Dell recommends that networks with more than 128 W-IAPs be designed as multiple, smaller VC networks with Layer-3 mobility enabled between these networks. Dell W-IAPs are available in the following variants: l US (United States) l JP (Japan) l RW The following table provides the variants supported for each W-IAP platform: Table 4: Supported W-IAP Variants W-IAP Model (Reg Domain) W-IAP###US (US only) W-IAP###JP (Japan only) W-IAP###RW (Rest of the World except US/JP) W-IAP334/335 Yes W-IAP314/315 Yes W-IAP324/325 Yes W-IAP277 Yes Yes Yes Yes Yes Yes Yes Yes Yes 12 | About Instant Dell Networking W-Series Instant 6.5.1.0-4.3.1.0 | User Guide