Dell W-Series 334 Instant 6.5.1.0-4.3.1.0 User Guide - Page 371
Uplink Bandwidth Monitoring, Use the support commands under the supervision of Dell technical support.
![]() |
View all Dell W-Series 334 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 371 highlights
VC Uplink Management Configuration VC WISPr Configuration VC XML API Server Information VC rfc3576-radius statistics show uplink config show wispr config show xml-api-server show ap debug rfc3576-radius-statistics Use the support commands under the supervision of Dell technical support. Uplink Bandwidth Monitoring A W-IAP uses Iperf3 as a TCP or UDP client to run a speed test and measure the bandwidth on an uplink. The results from the speed test are collated by the W-IAP and published to Analytics and Location Engine (ALE). The speed tests can be run only on the master W-IAP of the cluster. You may choose to configure and execute a speed test profile during boot time and additionally at specific time intervals using the configuration mode or execute the speed test at any preferred time using the privileged EXEC mode in the CLI. To configure and automatically run speed tests at specific time intervals: (Instant AP)(config)# speed-test (Instant AP)(speed-test)# include-reverse (Instant AP)(speed-test)# server-ip (Instant AP)(speed-test)# server-port (Instant AP)(speed-test)# protocol (Instant AP)(speed-test)# on-boot (Instant AP)(speed-test)# time-interval (Instant AP)(speed-test)# bandwidth (Instant AP)(speed-test)# sec-to-measure (Instant AP)(speed-test)# end (Instant AP)# commit apply To configure and execute a speed test at any point in time: (Instant AP)# speed-test [|| |] (Instant AP)# end The view the speed test results: (Instant AP)# show speed-test data (Instant AP)# end Following is an example of the speed-test result (Instant AP)# show speed-test data Speed Test results : Time of Execution :Fri, 11 Nov 2016 07:06:29 Server IP :10.17.138.2 Local IP :10.17.138.92 Local Port :62716 Remote Port :5201 MAC :40:e3:d6:cf:f5:2e System Name :40:e3:d6:cf:f5:2e Protocol :TCP Duration :10 Upstream Bytes :496028352 Upstream Bandwitdh(Mbps) :395.97 upstream retries :0 Downstream Bytes :615227296 Downstream bandwidth (Mbps) :492.18 The following command shows the number of times the uplink bandwidth report was sent to the ALE server. To display the uplink bandwidth counter: (Instant AP)# show ale stats ALE Stats Dell Networking W-Series Instant 6.5.1.0-4.3.1.0 | User Guide Monitoring Devices and Logs | 371
![](/manual_guide/products/dell-wseries-334-instant-65104310-user-guide-7cff9ad/371.png)