Dell W-Series 334 Instant 6.5.1.0-4.3.1.0 User Guide - Page 233
If required, enable default l2 specific sublayer in the L2TPv3 session., to continue.
View all Dell W-Series 334 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 233 highlights
b. Enter the tunnel profile name where the session will be associated. c. Configure the tunnel IP address with the corresponding network mask and VLAN ID. This is required to reach an W-IAP from a corporate network. For example, SNMP polling. d. Select the cookie length and enter a cookie value corresponding to the length. By default, the cookie length is not set. e. Specify the remote end ID. f. If required, enable default l2 specific sublayer in the L2TPv3 session. g. Click OK. 5. Click Next to continue. In the CLI To configure an L2TPv3 VPN tunnel profile: (Instant AP)(config)# l2tpv3 tunnel (Instant AP)(L2TPv3 Tunnel Profile )# primary peer-address (Instant AP)(L2TPv3 Tunnel Profile )# backup peer-address (Instant AP)(L2TPv3 Tunnel Profile )# checksum (Instant AP)(L2TPv3 Tunnel Profile )# failover-mode (Instant AP)(L2TPv3 Tunnel Profile )# failover-retry-count (Instant AP)(L2TPv3 Tunnel Profile )# failover-retry-interval (Instant AP)(L2TPv3 Tunnel Profile )# hello-timeout (Instant AP)(L2TPv3 Tunnel Profile )# local-port (Instant AP)(L2TPv3 Tunnel Profile )# peer-port (Instant AP)(L2TPv3 Tunnel Profile )# message-digest-type (Instant AP)(L2TPv3 Tunnel Profile )# secret-key (Instant AP)(L2TPv3 Tunnel Profile )# mtu (Instant AP)(L2TPv3 Tunnel Profile )# end (Instant AP)# commit apply To configure an L2TPv3 session profile: (Instant AP)(config)# l2tpv3 session (Instant AP)(L2TPv3 Tunnel Profile )# cookie len value (Instant AP)(L2TPv3 Tunnel Profile )# l2tpv3 tunnel (Instant AP)(L2TPv3 Tunnel Profile )# tunnel-ip mask vlan (Instant AP)(L2TPv3 Tunnel Profile )# default-l2-specific-sublayer (Instant AP)(L2TPv3 Tunnel Profile )# end (Instant AP)# commit apply Example (Instant AP)(config)# l2tpv3 tunnel test_tunnel (Instant AP)(L2TPv3 Tunnel Profile "test_tunnel")# primary peer-address 10.0.0.65 (Instant AP)(L2TPv3 Tunnel Profile "test_tunnel")# backup peer-address 10.0.0.63 (Instant AP)(L2TPv3 Tunnel Profile "test_tunnel")# no checksum (Instant AP)(L2TPv3 Tunnel Profile "test_tunnel")# failover-mode non-preemptive (Instant AP)(L2TPv3 Tunnel Profile "test_tunnel")# failover-retry-count 5 (Instant AP)(L2TPv3 Tunnel Profile "test_tunnel")# failover-retry-interval 80 (Instant AP)(L2TPv3 Tunnel Profile "test_tunnel")# hello-timeout 150 (Instant AP)(L2TPv3 Tunnel Profile "test_tunnel")# mtu 1570 (Instant AP)(L2TPv3 Tunnel Profile "test_tunnel")# peer-port 3000 (Instant AP)(L2TPv3 Tunnel Profile "test_tunnel")# secret-key test123 (Instant AP)(L2TPv3 Tunnel Profile "test_tunnel")# end 233 | VPN Configuration Dell Networking W-Series Instant 6.5.1.0-4.3.1.0 | User Guide