Dell W-Series 334 Instant 6.5.1.0-4.3.1.0 User Guide - Page 411
Glossary
View all Dell W-Series 334 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 411 highlights
Table 87: W-IAP Configuration for Scenario-GRE: Single Datacenter Deployment with No Redundancy Configuration Steps CLI Commands UI Procedure (Instant AP)(SSID Profile "wireless-ssid")# authsurvivability 7. Create access rule for wired and wireless authentication. For wired profile: (Instant AP)(config)# wlan access-rule wired-port (Instant AP)(Access Rule "wired-port")# rule any any match any any any permit For WLAN SSID employee roles: (Instant AP)(config)# wlan access-rule wirelessssid (Instant AP)(Access Rule "wireless-ssid")# rule any any match any any any permit See Configuring ACL Rules for Network Services NOTE: Ensure that you execute the commit apply command in the Instant CLI before saving the configuration and propagating changes across the W-IAP cluster. W-IAP-Connected Switch Configuration Client VLANs defined in this example must be opened on the upstream switches in multiple W-IAP deployments, as client traffic from the slave to the master is tagged with the client VLAN. Datacenter Configuration For information on controller configuration, see Configuring a Controller for IAP-VPN Operations on page 243. The following GRE configuration is required on the controller: (host)(config)# interface tunnel (host)(config-tunnel)# description (host)(config-tunnel)# tunnel mode gre (host)(config-tunnel)# tunnel source (host)(config-tunnel)# tunnel destination (host)(config-tunnel)# trusted (host)(config-tunnel)# tunnel vlan Glossary The following table lists the terms and their definitions used in this document. Dell Networking W-Series Instant 6.5.1.0-4.3.1.0 | User Guide IAP-VPN Deployment Scenarios | 411