Dell W-Series 334 Instant 6.5.1.0-4.3.1.0 User Guide - Page 395

Scenario 1-IPsec: Single Datacenter Deployment with No Redundancy This scenario includes the following configuration elements: 1. Single VPN primary configuration using IPsec. 2. Split-tunneling of client traffic. 3. Split-tunneling of DNS traffic from clients. 4. Distributed, L3 and Centralized, L2 mode DHCP. 5. RADIUS server within corporate network and authentication survivability for branch survivability. 6. Wired and wireless users in L2 and L3 modes, respectively. 7. Access rules defined for wired and wireless networks to permit all traffic. Topology Figure 120 shows the topology and the IP addressing scheme used in this scenario. Figure 120 Scenario 1-IPsec: Single datacenter Deployment with No Redundancy The following IP addresses are used in the examples for this scenario: l 10.0.0.0/8 is the corporate network l 10.20.0.0/16 subnet is reserved for L2 mode l 10.30.0.0/16 subnet is reserved for L3 mode l Client count in each branch is 200 W-IAP Configuration The following table provides information on the configuration steps performed through the CLI with example values. For information on the UI procedures, see the topics referenced in the UI Procedure column. 395 | IAP-VPN Deployment Scenarios Dell Networking W-Series Instant 6.5.1.0-4.3.1.0 | User Guide